Announcements
IMPORTANT: Cypress Developer Community is transitioning on October 20th. To learn more and be prepared for this change, check out our latest announcement.
cancel
Showing results for 
Search instead for 
Did you mean: 

Wi-Fi Combo

Anonymous
Not applicable

Module: 4343W

When joining an AP named CDW530AM, the return of host_rtos_get_semaphore is WWD_TIMEOUT, please refer the screenshot attached. The relevant code is below(WICED-SDK\WICED\WWD\internal\wwd_sdpcm.c):

   /* Wait till response has been received  */

    retval = host_rtos_get_semaphore( &wwd_sdpcm_ioctl_sleep, (uint32_t) WWD_IOCTL_TIMEOUT_MS, WICED_FALSE );

    if ( retval != WWD_SUCCESS )

    {      
        /* Release the mutex since wwd_sdpcm_ioctl_response will no longer be referenced. */

        host_rtos_set_semaphore( &wwd_sdpcm_ioctl_mutex, WICED_FALSE );

      
        return retval;

   }

The sniffer log named filter_with_mac_addr_60f1893e7335.pcap is also attached.

However this issue is only met on this type Access point, the failed rate is also not 100% on this type Access point.

More information about the wireshark packet:


1) mac address of client: 60:f1:89:3e:73:35
;

2) mac address of AP: 00:50:18:5d:ff:62;

3) encryption type: WPA2_AES;
3) the ssid/password is "TestBench/TestBench";
4) channel is 1;
5) wpa psk is "caf739524381fd60b3229a7093b9164aed3f0e94c04a9ef08b3245f0a466d0a0"

thanks,

Hanson

IAR_debug.jpg

0 Likes
1 Reply
Anonymous
Not applicable

Info about the project:

Name of the Project: Wireless On Panel

OS: ThreadX

WICED-SDK: 3.3.1

WiFi Firmware Version: 7.45.41

thanks,

Hanson.

0 Likes