Wi-Fi Combo Forum Discussions
I did not modify any code.
I double-clicked "snip.httpbin_org-BCM943364WCD1 download downlad_apps run"
It compiled normally.
However, the above error message occurs.
How can I solve it?
My goal: I want to access a specific URL and receive Return value.
Show LessI am using WICED-Studio-6.0 on CYW943907AEVAL1F platform.
I am facing a trouble of CYW43907 SPI behavior.
When I write "0x01" to SPI device, the device can't get the data correctly.
Please see the oscilloscope waveform below. somehow the last bit width is half of clock period.
This is a reason why SPI device can't get the data.
Please let me know how I can fix it.
Show LessWe are developing a wireless medical camera. The camera module used for the application is OmniVision's OV6946. It captures high quality 400 x 400 resolution images and video at 30 frames per second (fps) . The color scheme of the camera is RAW Bayer. Sensor bridge ASIC OV426 is used to convert analog output from sensor OV6946 to digital and provide basic ISP functions.The Output Interface is 10-bit DVP. The camera data should be transmitted to the host wirelessly at 30fps . We have already developed a USB based interface using FX3 UVC application. Now we wanted to make it wireless interface. I wanted to know what is best hardware solution available from cypress to achieve this.
Show LessHi
All the DCT index define as below:
platform_dct.h
#define DCT_FR_APP_INDEX ( 0 )
#define DCT_DCT_IMAGE_INDEX ( 1 )
#define DCT_OTA_APP_INDEX ( 2 )
#define DCT_FILESYSTEM_IMAGE_INDEX ( 3 )
#define DCT_WIFI_FIRMWARE_INDEX ( 4 )
#define DCT_APP0_INDEX ( 5 )
#define DCT_APP1_INDEX ( 6 )
#define DCT_APP2_INDEX ( 7 )
internal + external system flash layout (4343WWCD1 evb), the layout get from WICED-OTA.pdf
Show Less
Is there ready-made code available with can be used to take control of the radio for the required test modes of EN 300 328, FCC and ISED Canada RSS testing?
If yes how can I get it?
Thanks,
Tom
Show LessDear sirs,
In our project, we have a thead receiving data from server every 10 secs. We need to show the data on the OLED screen immediately when received. I am not familiar with u8glib, We want to ask for advice how to design the display thread or api?
Thanks a lot.
Show LessI have CYW943907AEVAL1F Dev Kit and I can program it with J-Link. Now I would like to debug the application. Are there any app notes to get familiar with Debugging procedure?
Show LessI am unable to run the following target using the PSoC 6 WiFi-BT Pioneer Kit:
snip.scan-CY8CKIT_062 download_apps download run
When I build snip.scan-CY8CKIT_062 download_apps download run I receive the following error:
Building apps lookup table
Downloading Bootloader ...
"**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"
Downloading DCT ...
"**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"
Downloading Application ...
"**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"
Downloading resources filesystem ... build/snip.scan-CY8CKIT_062/filesystem.bin at sector 1 size 96...
tools/makefiles/wiced_apps.mk:308: recipe for target 'FILESYSTEM_IMAGE_DOWNLOAD' failed
make.exe[1]: *** [FILESYSTEM_IMAGE_DOWNLOAD] Error 1
make.exe[1]: *** Waiting for unfinished jobs....
make: *** [main_app] Error 2
Makefile:349: recipe for target 'main_app' failed
I am able to successfully build a snip.scan example using WICED 6.1.0.85 using two other development boards: Future Electronic's NEB1DX_01 and MurataType1LD. However I have no luck using the CY8CKIT_062.
I start by pressing SW3 on the CY8CKIT-WiFi-BT until LED2 turns off as instructed in the user guide.
User guide: "Press the SW3 switch on the board to change the port settings to CMSIS-DAP."
I never receive any indication within device manager that the port settings are changed however I do see that only LED4 is illuminated. There is a device named "KitProg2 USB-UART".
Information posted in Documents\WICED-Studio-6.1\43xxx_Wi-Fi\build\openocd_log.txt:
Open On-Chip Debugger 0.10.0+dev-00225-ga9a9861c (2018-02-06-09:36)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "swd". To override use 'transport select <transport>'.
adapter speed: 1000 kHz
cortex_m reset_config sysresetreq
cortex_m reset_config vectreset
Error: unable to find CMSIS-DAP device
Is there any explanation of why WICED is unable to find CMSIS-DAP device?
Any help is greatly appreciated.
Show LessHello
I am implementing a server with my ISM4319_TESTBOARD. For this I am using the function:
wiced_http_server_start ( & ap_http_server, 80, max_sockets, web_pages, WICED_AP_INTERFACE, DEFAULT_URL_PROCESSOR_STACK_SIZE );
where:
max_sockets = 5;
Once this is done, a client device can connect to the access point of my server and make http requests.
The problem occurs when the client disconnects and reconnects from my access point. After trying "max_sockets" my server gets stuck and does not respond to client requests,
I have noticed that if before the client disconnects from my server, I stop the http port with the function:
wiced_http_server_stop (& ap_http_server);
and then I start again the http port, my server is no longer locked when I disconnect and reconnect to the access point, however this solution is not very useful, since I can not detect when a client is connected to my access point of unless the client makes an http request.
My two questions are:
How can I detect when a client device has just connected to the access point of my server, without having sent a request to the server?
Is there any other way to prevent my server from locking without having to restart my http port?
I would greatly appreciate your help.
Show LessHello,
I am implementing an http server on my ISM43362 test board with the Wiced 3.5.2.
I've been trying to detect when a new device connects to the access point that I created, but I have not.
How can I detect when a client device has just connected to the access point of my server?
Show Less