- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I've been trying to get the BCM943362WCD4 working in ubuntu 14.04. I have done the procedure described in "Link". It still doesn't seem to be showing up, here is the current status of the device when using "cat /sys/kernel/debug/usb/devices"
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=04 Dev#= 19 Spd=480 MxCh= 0
😧 Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=43fa Rev= 7.00
S: Manufacturer=Broadcom
S: Product=WICED Eval Board
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I'm running out of ideas, any help would be greatly appreciated!
Best,
Brandon
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
[SOLVED]
PLEASE UPDATE THE INSTALLATION DOCS FOR LINUX
See bellow for fix:
sudo chmod 666 /sys/bus/usb-serial/drivers/ftdi_sio/new_id
nano /sys/bus/usb-serial/drivers/ftdi_sio/new_id
type my vendor and product id and save file with CTRL+x > yes
Little surprised that no one chimed in...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
[SOLVED]
PLEASE UPDATE THE INSTALLATION DOCS FOR LINUX
See bellow for fix:
sudo chmod 666 /sys/bus/usb-serial/drivers/ftdi_sio/new_id
nano /sys/bus/usb-serial/drivers/ftdi_sio/new_id
type my vendor and product id and save file with CTRL+x > yes
Little surprised that no one chimed in...