Does Control Center Support loading the firmware across multiple I2C EEPROM?

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable
        Hi, Does Control Center Support loading the firmware(*.img) across multiple I2C EEPROM? I use five EEPROMs at 256Kbit. Their address are A<2:0>=b000/001/010/011/100. I performed this operation:"Program ->FX3 -> I2C E2PROM". After choose my firmware file, Control Center show "Programing of I2C E2PROM Succeeded". But I cannot boot from EEPROM. I checked datas in the EEPROMs. A<2:0>=b000 was written something. However, other EEPROMs were not written nothing. Best regards, Jumpei   
0 Likes
1 Reply
Anonymous
Not applicable

Hi,

   

I remember us testing with 2 EEPROMs to make sure the algorithm is in place. Please check if you've written the right values for EEPROM data (size and speed) when generating the image. Is the data in b000 EEPROM the intended first 256Kbit or something else?

   

Regards,

   

Anand

0 Likes