Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob

USB EZ-PD™ Type-C Forum Discussions

AkashHemwani
USB EZ-PD™ Type-C
Hi ,    I am trying to stream video data via FX3 coming from my fpga at 5200*3900 resolution at 15fps and not able to set min /max bit rate descriptor... Show More
她说隔岸观火
USB EZ-PD™ Type-C

我使用libusb可以打开usb设备,但是无法烧写固件,我需要在执行烧录固件之前,还需要做什么步骤

Jedison
USB EZ-PD™ Type-C
Dear Infineonistas, Looking at the UM_2212_PL91_2301_134027 document titled:  “Hardware design guidelines for EZ-PD™ CCG7D in automotive applications”... Show More
Koki
USB EZ-PD™ Type-C
Hi Infineon Support, Thank you for your support. Please tell me about CYPM1111.CYPM1111 is equipped with SROM. Is this SROM a regular flash? Also, ple... Show More
Koki
USB EZ-PD™ Type-C
Hi Suppor, Thank you for usual support. I have question about document of CCG series Application Note. I think CCG5 has integrated PFET Gate Driver fo... Show More
Koki
USB EZ-PD™ Type-C
Hello support, I believe that the linearity guarantee of the ADC has been verified, but is it possible to share the verification results ? Best regard... Show More
Translation_Bot
USB EZ-PD™ Type-C
We refer to CCG3PA datasheet to try to know CCG3PA power consumption. but it only mentions about typical values measured at "VDDD = 5.0V" What is the ... Show More
ninaleechie
USB EZ-PD™ Type-C
We used the CYPD3177 parts a few times and I see there are CYPD3176 and CYPD3178 available now. When we used this part, we ran into an issue when conn... Show More
kimata
USB EZ-PD™ Type-C
I am having trouble using EZ-PD Protocol Analyzer version 4.0.0 on Windows 11. The situation is that the driver is not properly applied and the CY4500... Show More
Ivan_Lee
USB EZ-PD™ Type-C
We have a question about VBUS_FET_EN power path behave. if BCR hw setting is VBUS_MIN = 5V, VBUS_MAX = 9V and ISNK_COARSE + ISNK_FINE = 0.9A (900mA), ... Show More
Forum Information

USB EZ-PD™ Type-C

Discussion forum regarding USB EZ-PD™ Type-C topics.