Microcontrollers Forum Discussions
Browse the Community
PSoC™ 6
Discussion forum regarding PSoC™ 6 - 32-bit Arm Microcontroller (MCU) Forum, discusses the 40-nm technology - best combination of ultra-low-power consumption, flexibility, security and high-performance topics.
PSoC™ 4
PSoC™ 4 - Arm®-based Forum, discusses the low-power Cortex®-M0 and Cortex®-M0+ cores, CapSense®, and Bluetooth® Low Energy
PSoC™ 5, 3 & 1
The PSoC™ 5LP, PSoC 2 and PSoC 1 Forum discusses - 24-bit Digital Filter Block (DFB), 24 UDBs, DMA controller and integrating AFE, digital logic with user interface ICs with an Arm Cortex-M3 CPU solutions.
CAPSENSE™ & MagSense
The Sensing Technology Forum discusses CAPSENSE™ - capacitive-sensing and MagSense inductive-sensing for consumer, industrial, automotive, and Internet of Things (IoT) applications.
XMC™
AURIX™
In this forum you can post your questions, comments and feedback about the 32-bit AURIX™ TriCore™ Microcontroller. The AURIX™ offers the highest scalability in performance, memory & peripherals across application. It is a safe and secure companion chip, meeting both the ISO functional safety standards and EVITA full security standards. Here you can also find the links to the latest board pages, SW and Tools GitHub, trainings, documents and FAQs
TRAVEO™ T2G
Discussion forum regarding 32-bit TRAVEO™ T2G Microcontroller - based on ARM® for automotive body electronics applications; cutting-edge performance, safety, and security features topics.
MOTIX™ MCU
The MOTIX™ MCU forum is designed for you to post your questions, comments and feedback about the famous Embedded Power ICs at anytime. Ask your technical questions or explore existing content!
Legacy microcontrollers
Featured Discussions
Hi,
I want to configure my UART module
TX should happen with 10US that i have configured with GPT ,
RX should happen with Interrupt based.
same when i tested RX got struck in IfxStm_isDeadLine(inline) function.
I want to know why it is getting strucked
Show Less
Hello All,
I am trying to debug using Aurix TC399XP kit, winIDEA debugs successfully.
However, when I try the Tasking c/c++ debugger, it fails with the following error "Loading failed: Flash programming failed, there may be a problem with the flash memory itself."
I am using the latest Aurix Development Studio v1.9.20.
BR,
Show LessHi, I am using TC 387. Is it possible to do multi tasking in this board in a single core?
Hello everyone, I use MCU that has 3V3 output and 5V input tolerant pins, but for my application I need to have 5V output and 5V tolerant input pins. How can I achieve this? Expander is not in the option because it needs SPI/I2C drivers in firmware, and I want to avoid that. I can make 3V3 pin output into 5V pin output using MOSFETs but then the input part is tricky.
Thanks in advance !
Hi everyone,
I started working with Linker scripts and startup code that comes in the demo, but I can't find a reference/ manual that will documents the scripting language used in the LSL files mainly the HighTech one.
Can anyone please point me towards it?
And I want to know what does a FLAGS(z) mean I can't find any answer to what this "z" flag do.
Thank You.
Show LessIm using tc377 for uart communication, I have to send data from tx without interrupt by using Timer(Gpt12)
when i using this Data is stored in Tx buffer but not transmitting to Rx.
This is timer function
void interruptGpt12_T3(void)
{
IfxCpu_disableInterrupts();
IfxPort_togglePin(LED);
if(g_flag1 == 1)
{
send_receive_ASCLIN_UART_message();
}
IfxGpt12_T3_setTimerValue(&MODULE_GPT120, RELOAD_VALUE_T3);
IfxCpu_enableInterrupts();
}
This one data transfer and receive function through uart
extern void send_receive_ASCLIN_UART_message(void)
{
IfxAsclin_Asc_write(&g_ascHandle, g_txData, &g_count, TIME_INFINITE); /* Transmit data via TX */
IfxAsclin_Asc_read(&g_ascHandle, g_rxData, &g_count, TIME_INFINITE); /* Receive data via RX */
}
Show Less
Hi infineon
As the title said, I got a problem with "Vddk", I use the next formula to configure "Vddk", but some products(not all, same program) will exceed the threshold(±2%) when ambient temperature increasing, and the calculated value close to low boundary? Could you give me some advise? Thanks
Show Less
We have been working on debugging an issue where the TC29x Ethernet receiver halts after being saturated with messages and the Ethernet module must be restarted for the receiver to continue receiving messages. We have seen this behavior on two of our designs and on the TC2X9 Triboard. In debug mode the Receive Watchdog Timeout bit causes an interrupt and data corruption is seen when reviewing the Rx buffers. This eventually leads to the receiver halting, no longer receiving any messages and the missed FIFO counter being filled with the missed messages. We are trying to determine the root cause of the data corruption and the halting of the receiver. Any help on this would be greatly appreciated.
Note, with our current test configuration we have also seen that disabling the "Automatic Pad or CRC Stripping" and "CRC Stripping of Type FRAMES" in the MAC configuration prevents the receiver from halting, but we would like to know the root cause of this issue.
Show LessI'm trying to eliminate one particular ISR from my old OS configuration. So currently RTA-OS configuration tool, tricore tasking of version 6.2 with licensed & old configured file .rtaos & .arxml. To build i'm using BuildOS.bat (tricore compiler) file.
But when i try to check documents related to build using available file i'm unable get it. As i'm new user to this not getting where the mistake is done. Kindly it's my humble requesting for guidance to build with correct path & setup.
Show Less-
TraveoII
UART buadrate Setting
by chandan1995 Jun 19, 2023