Announcements
IMPORTANT: Cypress Developer Community is transitioning on October 20th. To learn more and be prepared for this change, check out our latest announcement.
cancel
Showing results for 
Search instead for 
Did you mean: 

Studio Bluetooth

veb_3529051
New Contributor

Hi,

How to get the 20719 HCI Command details for wmbt radio_rx_test

0000 < 19 10 08 12 00 01 52 FC 0E 45 23 01 3A 70 20 E8 >

0010 < 03 00 02 01 03 11 00 >

like below

14 FC  // means operation code set_tx_frequency_arm

07   // command length

00   // carrier on

02   // ( 2402  minus 2400)

01  // PRBS9

02  // 8PSK

Thanks

0 Likes
1 Solution
Zhengbao_Zhang
Moderator
Moderator

Hi:

please take a look at below picture:

0000 < 19 10 08 12 00 01 52 FC 0E 45 23 01 3A 70 20 E8 >

0010 < 03 00 02 01 03 11 00 >

pastedImage_0.png

0x19    //HCI_WICED_PKT

10   //EVENT code

08   //Group Code

12 00  // command length and  means following 18 bytes

The followed 18 bytes include operation code, and parameters need to be changed.

please take a look at our document released with SDK .

please install our wiced studio and find this document.

WICED-HCI-Control-Protocol.pdf

View solution in original post

0 Likes
1 Reply
Zhengbao_Zhang
Moderator
Moderator

Hi:

please take a look at below picture:

0000 < 19 10 08 12 00 01 52 FC 0E 45 23 01 3A 70 20 E8 >

0010 < 03 00 02 01 03 11 00 >

pastedImage_0.png

0x19    //HCI_WICED_PKT

10   //EVENT code

08   //Group Code

12 00  // command length and  means following 18 bytes

The followed 18 bytes include operation code, and parameters need to be changed.

please take a look at our document released with SDK .

please install our wiced studio and find this document.

WICED-HCI-Control-Protocol.pdf

View solution in original post

0 Likes