PSoC™ 6 Forum Discussions
I want to read the ADC value of two pins (P8_0 and P8_1).
I tried to initialize and read the values but failed to read then, as the initialization failed.
I want to know about initialization and reading the values.
Am using modustoolbox IDE and CY8C6245LQI-S3D42 board.
Show LessHi sir,
I want to new a MTB application on an offline mode, but I encounter an error with below message:
ERROR:there was an error retreiving the asset 'https://github.com/Infineon/device-db' commit 'release-v4.2.0' - the git repo 'C:/Users/leo.zj.chiu/.modustoolbox/offline/git/https___github.com_Infineon_device-db/device-db' does not contain the commit 'release-v4.2.0'
ERROR:Global asset download of device-db loading completed with error.
ERROR:The asyncStepComplete failed for LoadFlag DEVICE_DB.
I have no idea how to deal with it.
Show LessHi,
I am trying to automate loading a HEX file on a PSoC using a MiniProg4. For that, I am reading the PSoCProgrammer COM User Guide. It gives a list of commands that I can use, however, the description of commands is very poor. For example, for SetAcquireMode command has "mode" input that could be Reset, Power, or PowerDetect. But for a person with no background in this, these inputs make no sense without an explanation. My question is
Where can I find a detailed explanation of the commands and what they really mean?
Thank you
Show LessHi
I developed a Python script to program a PSoC6 with PSoC Programmer COM interface. It works fine with HEX files generated by PSoC Creator, however, it does not work with HEX files created by the ModusToolBox and I get this error
"Hex File parsing failure. Unknown record type"
According to this thread https://community.infineon.com/t5/ModusToolbox-General/Modus-generated-hex-file-cannot-be-parsed-by-PSoC-programmer/td-p/112392 I won't be able to solve this issue.
Is there a way to solve the compatibility problem or, Is there a COM interface for ModusToolBox?
Show LessHi
Using the sample code to program a PSOC6, I found that the code programs three different flash types; main, working, and supervisory flash.
First of all, I could not find a definition of these memories (I am a novice in this field). Could you refer me to the right resources describing definitions?
Secondly, Do I have to program all three memories? My code which is a Blinky LED runs fine with just programming the Main Flash.
Thank you
Show LessHi ,
In order to support FAT on uSD, we can use emfile driver.
However, I met a problem that I can’t use QSPI HAL to init SPI rom successfully after using emfile for uSD only.
I’m not sure if it’s a driver limitation or config setting problem.
Could you help on that to use emFile for uSD and SPI access at the same time?
Regards,
Kyle
Show LessHello,
I have seen that in many projects for the PSoC62 the startup code for the cm0+ copies the vector table into SRAM, no matter what.
Is there an example that shows how to keep that table in its original position in FLASH?
Show Less