PSoC™ 5, 3 & 1 Forum Discussions
text.format{('custom.tabs.no.results')}
Hi !
I'm extremely interested in the integeration to my current project a graphic LCD drived by a Solomon Systech SSD1926 controlleur, I would like to know then when the "CY8CKIT-032 Graphics LCD Interface Kit" will be released to custumer ?
Thank u in advance
Show LessHow can the 'configurable reset' pin P1[2] configured as reset? Can't seem to find it anywhere...
(This is for the CY8C5588 processor board, on the CY8CKIT-001. )
Thanks,
~Abhijit
Show LessCY8CKIT-030 purchased with pre-programmed demo (ADC, LCD, Buttons, Capacitive).
Where I can find source of this demo? I found only examples of parts, but not a whole project 😞
Show LessHi everyone,
Could I use the DMA controller to perform a reading on a MASTER SPI?
Setting the source address of the DMA channel and TD as the pointer to the RX data buffer of the spi, I do a reading of the buffer contents, while I need to perform a new reading.
There is a way to do this ?
Thanks in advance for any suggestion
Show LessHello,
I have a problem with programming CY8C3866AXI-040ES2 on my own pcb board.
When i go to program menu (ctrl + f5), i can see that my device is seen, but ther is also message: "Avaible fo use Unacquired."
When i go with pointer on device name, it shows also massage: "Unable to read memory, Debug anable is not set, Click Port Acquire to to reset the chip and enale debug. When I do it, nothing is happening, still the same error."
And last think, when i double click on device on this programing menu i've got: "Unable to read the silicon revision for target device 'unknown target'. Click Port Acquire to reset the chip."
I have no idea what can I do now.
Please help,
Thanks
Show LessHello:
I have same question about the USB function setting in my project ,and the details are as follow:
1.In my project, i want to use the USB component to communicate between my DVK and WIN7 PC,
dunring the running time,the DVK sends message to PC,and then PC deals with message, after that
PC display the result(such as plot point or line) in MS paint!
2.And the attached file describes the problem more detailed, and the project can plot line continually!
3.Thanks for you kindly reply!
Show LessCypress at the Embedded World 2012. Meet Cypress at the Embedded World in Nuremberg from February 28 through March 1.The Embedded World is the most important embedded event in Europe and more than 19000 visitors were there in 2011. Cypress will show multiple applications using PSoC 3 and PSoC 5 devices. One is a quad-copter that will be fun to watch. Come and see us in Hall4A-106. The booth will be manned with highly knowledgeable engineers to answer any questions you might have.
Show LessCypress will be at Mobile world congress. The greatest touchscreen solutions and USB solutions will be on display. Cypress invites you to experience its breakthrough mobile handheld solutions at the Mobile World Congress in Barcelona, February 27-March 1, 2012
http://www.cypress.com/
I am designing an automatic reading system using ZigBee and GSM technology. I am using PSoC3 kit for development.
Please help me designing Meter Interface Unit.
Show LessDoes PSOC creater come with a stacks library, or do i need to find my own?