Announcements
IMPORTANT: Cypress Developer Community is transitioning on October 20th. To learn more and be prepared for this change, check out our latest announcement.
cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

joli_601446
Contributor

Hello, I'm using a DC/DC converter that has a Power Management Bus interface that can be used to program the DC/DC converter. Are there any modules that I could use to implement a PMBUS interface?

Thanks,

Joe

0 Likes
1 Solution
Vasanth
Moderator
Moderator

Hello Joe,

There is a PMBus Slave implementation.

link : http://www.cypress.com/documentation/component-datasheets/smbus-and-pmbus-slave

Best Regards,
VRS

View solution in original post

0 Likes
2 Replies
joli_601446
Contributor

Hello, just letting the community know that the PMBUS is really I2C. That is my understanding so this should be easily done in the PSOC MCU.

Joe

0 Likes
Vasanth
Moderator
Moderator

Hello Joe,

There is a PMBus Slave implementation.

link : http://www.cypress.com/documentation/component-datasheets/smbus-and-pmbus-slave

Best Regards,
VRS

View solution in original post

0 Likes