Is there an option to use the mini prog 3 as debugger in the design challenge development kit?
If not, how do we use the debug feature?
You can debug the kit thru either a MiniProg3 (not included) or via USB, using the USB programing connector. Debug is a little slower via USB, but still supports all of the features.
So, I'm taking it from "rdaley"'s response that at least one person has been able to install the software from the CD (+net). Am I the only one having trouble? I've tried to multiple times both before and after "the standard WIndows remedy" (a reboot), and tried both "Typical" and "Complete" package options, and have had no success. I don't believe that I'm running out of disk space, and happen to be running XP, and am installing (but don't plan on running) as admin.
It dies at the same point every time, namely during the download/installation of "PSoC 5 Development Kit 1.0 Rev**", and I get "Installer is unable to download installation Packages. Please check your internet connection and try again. Details: Data error (cyclic redundancy check)."
Anyone else had successes or failures?
I've installed it on Vista and XP without any problems. Sorry, I know that doesn't help. It sounds like the installer got messed up. I had a similar problem installing the sense and control dashboard. You may want to install on another machine and copy the data over.
I was able to get the software for our kits to install only after installing the software for the -001 kit. After installing the latter, I was able to install the former -- which took almost no time because it appears that well over 90% of the software is common, and so virtually nothing else had to be installed to get the -050 software going.
From all symptoms, it appeared to be a bad software module in the download area for the -050, but was good in the -001 package. I suppose it's possible that a locally cached -050 package was corrupted and wasn't getting displaced by a good one from the server by the downloader, in spite of 3-4 attempted uninstalls and re-installs.
Unfortunately I don't have second machine at my disposal to compare its behavior against, but hopefully what I've got installed now is complete and correct.