Hello
I have Psoc 4 KIt. recentally I have done LED, LCD based Project. Now I want to interface ds1307 with LCD. I looked example project. That’s based on Psoc 3. But I am using Psoc 4
I created design. Design consist of LCD and ds1307. I am attaching my project workspace. please inform me there is any mistake in design
I am having problem in programming. I saw program in example project. That program was written for Psoc 3.
#include <device.h>
#include "utils.h"
void main()
{
uint8 tmpVar = 0u;
RTC_TIME_DATE Start;
/* Fill struct with date and time */
Start.Sec = 55u;
Start.Min = 59u;
Start.Hour = 22u;
Start.DayOfMonth = 31u;
Start.Month = 12u;
Start.Year = 2007u;
/* Enable all interrupts */
CyGlobalIntEnable;
/* Set date and time */
RTC_WriteTime(&Start);
/* Set alarm date and time */
RTC_WriteAlarmSecond(5u);
RTC_WriteAlarmMinute(3u);
RTC_WriteAlarmHour(1u);
RTC_WriteAlarmDayOfMonth(1u);
RTC_WriteAlarmMonth(1u);
RTC_WriteAlarmYear(2008u);
/* Set alarm mask */
RTC_WriteAlarmMask(RTC_ALARM_SEC_MASK | RTC_ALARM_MIN_MASK |
RTC_ALARM_HOUR_MASK | RTC_ALARM_DAYOFMONTH_MASK |
RTC_ALARM_MONTH_MASK | RTC_ALARM_YEAR_MASK);
/* Set interval mask - handling of interrupt stubs of the RTC component */
RTC_WriteIntervalMask(RTC_INTERVAL_SEC_MASK | RTC_INTERVAL_MIN_MASK |
RTC_INTERVAL_HOUR_MASK | RTC_INTERVAL_DAY_MASK |
RTC_INTERVAL_WEEK_MASK | RTC_INTERVAL_MONTH_MASK |
RTC_INTERVAL_YEAR_MASK);
/* DST start configuration */
RTC_WriteDSTMode(RTC_DST_ENABLE | RTC_DST_FIXDATE);
RTC_WriteDSTStartHour(23u);
RTC_WriteDSTStartDayOfMonth(31u);
RTC_WriteDSTStartMonth(12u);
/* DST stop configuration */
RTC_WriteDSTStopHour(2u);
RTC_WriteDSTStopDayOfMonth(1u);
RTC_WriteDSTStopMonth(1u);
RTC_WriteDSTOffset(123u);
/* Start RTC */
RTC_Start();
/* Start LCD */
LCD_Start();
/* Prepare 0th column */
LCD_Position(0u, 0u);
LCD_PrintString("RTC : : ");
/* Print current time */
tmpVar = RTC_ReadSecond();
PrintDecNumber(tmpVar, 0u, 11u);
tmpVar = RTC_ReadMinute();
PrintDecNumber(tmpVar, 0u, 8u);
tmpVar = RTC_ReadHour();
PrintDecNumber(tmpVar, 0u, 5u);
/* Prepare 1st column */
LCD_Position(1u, 0u);
LCD_PrintString(" - - ");
/* Get and print day of month */
tmpVar = RTC_ReadDayOfMonth();
PrintDecNumber(tmpVar, 1u, 0u);
/* Get and print month */
tmpVar = RTC_ReadMonth();
PrintDecNumber(tmpVar, 1u, 3u);
/* Get and print year */
tmpVar = (uint8)(RTC_ReadYear() % 100u);
PrintDecNumber(tmpVar, 1u, 6u);
/* Get and print day of week */
tmpVar = RTC_currentTimeDate.DayOfWeek;
LCD_Position(1u, 9u);
LCD_PutChar(tmpVar + 0x30u);
/* Get status */
tmpVar = RTC_ReadStatus();
/* Get and print if year is leap */
if(RTC_STATUS_LY & tmpVar)
{
LCD_Position(1u, 11u);
LCD_PutChar('L');
}
else
{
LCD_Position(1u, 11u);
LCD_PutChar(' ');
}
/* Get and print daytime AM/PM */
if(RTC_STATUS_AM_PM & tmpVar)
{
LCD_Position(0u, 14u);
LCD_PrintString("PM");
}
else
{
LCD_Position(0u, 14u);
LCD_PrintString("AM");
}
/* Get and print DST status */
if (RTC_STATUS_DST & tmpVar)
{
LCD_Position(1u, 13u);
LCD_PutChar('D');
}
else
{
LCD_Position(1u, 13u);
LCD_PutChar(' ');
}
/* Get and print alarm status */
if (RTC_STATUS_AA & tmpVar)
{
LCD_Position(1u, 15u);
LCD_PutChar('A');
}
else
{
LCD_Position(1u, 15u);
LCD_PutChar(' ');
}
while(1u)
{
/* Make a 100 ms delay */
CyDelay(100);
/* Prepare clock tree configuration for low power mode entry */
CyPmSaveClocks();
#if(CY_PSOC3)
/*******************************************************************
* Disable RTC interrupt before entering Sleep mode. The device will
* wake up on one pulse-per-second event, but the ISR will be
* executed when RTC interrupts will be enabled, after the clocks
* configuration will be restores. Potentially, this will allow to
* execute RTC ISR quicker, as CyPmSaveClocks() function could
* decrease master clock frequency. For PSoC 5 architectures
* (PSoC 5LP device), an interrupt is required for the CPU to wake
* up, so interrupt is disabled for PSoC3 only.
*******************************************************************/
RTC_DisableInt();
#endif /* (CY_PSOC3) */
/* Entry Sleep low power mode */
CyPmSleep(PM_SLEEP_TIME_NONE, PM_SLEEP_SRC_ONE_PPS);
/* Restore clock tree configuration */
CyPmRestoreClocks();
#if(CY_PSOC3)
/*******************************************************************
* Enable RTC interrupt for ISR to be executed on restored clock
* frequency.
*******************************************************************/
RTC_EnableInt();
#endif /* (CY_PSOC3) */
}
}
/* [] END OF FILE */
