Announcements
Community Announcement : Welcome to the NEW Cypress Developer Community.
cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4

YoIs_1298666
Contributor II

Hello,

AN86526 - PSoC4 I2C Bootloader is modified to work with CY8CKIT-145-40XX.

The AN86526 documentation describes how to debug Bootloadable.

pastedImage_0.png

I don't know how to set the Application Type to Normal.

Please tell me how.

Best regards,

Yocchi

0 Likes
1 Solution
MaMi_1205306
Honored Contributor

Hi,

The meaning of "Nomal" is that the Bootloader is not used.

pastedImage_0.png

Right-click on the Bootloadble component in your Bootloadble project and select Disable.

pastedImage_0.png

Debugging is possible by then building and programming the .HEX file using the automatically generated Boot.

Regards,

View solution in original post

0 Likes
3 Replies
MaMi_1205306
Honored Contributor

Hi,

The meaning of "Nomal" is that the Bootloader is not used.

pastedImage_0.png

Right-click on the Bootloadble component in your Bootloadble project and select Disable.

pastedImage_0.png

Debugging is possible by then building and programming the .HEX file using the automatically generated Boot.

Regards,

View solution in original post

0 Likes
YoIs_1298666
Contributor II

Hello,

Now I'm debugging with Bootloadable disabled and commented out the relevant code the way you say it.

// Bootloadable_Load();

Does that mean there is no other way?

Best regards,

Yocchi

0 Likes
MaMi_1205306
Honored Contributor

Yocchi-san,

As far as I know, there is no other way.

This is a recognition that PSoC Creator cannot do about debugging the Boot area.

Maybe other compilers can do it, but I don't know about that either.

Regards,

0 Likes