Announcements
IMPORTANT: Cypress Developer Community is transitioning on October 20th. To learn more and be prepared for this change, check out our latest announcement.
cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

Trouble getting SmartSense V1.30 user module to calibrate sensors correctly

Anonymous
Not applicable

Trouble getting SmartSense V1.30 user module to calibrate sensors correctly

Question: Why does the SmartSense V1.30 user module (available in PSoC Designer 5.2) not calibrate sensors correctly?

 

Answer:

The SmartSense version 1.30 user module (shipped in PSoC Designer 5.2) has a bug that prevents proper sensor calibration at power-up. The workaround is to download and install a patch for PSoC Designer to update the SmartSense user module code, fixing the bug.

Download the attached SmartSenseHotfix.exe. This is a self-extracting installer that will update your installed Smartsense user module code.

To use it,
- Run the SmartSenseHotfix.exe file
- Provide the install path for PD5.2 where your "common" folder is located (default is C:\Program Files\Cypress\PSoC Designer\5.2\).
- Make sure "overwrite" is checked and extract.


We apologize for the inconvenience this might have caused to you. Should you have questions regarding the SmartSense user module or this bug, please contact Cypress support at:

http://www.cypress.com/MyAccount/?id=25&techSupport=1

Attachments
0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Jan 24, 2012 10:44 PM
Updated by:
Anonymous
 
Contributors