Strictly necessary cookies are on by default and cannot be turned off. Functional, Performance and Tracking/targeting/sharing cookies can be turned on below based on your preferences (this banner will remain available for you to accept cookies). You may change your cookie settings by deleting cookies from your browser. Then this banner will appear again. You can learn more details about cookies HERE.
Strictly necessary (always on)
Functional, Performance and Tracking/targeting/sharing (default off)
Question: Is a 1Meg resistor across the crystal required for the CY7C64013's Clock Circuit?
No external components should be added to the clock. There is an internal 30pf cap at each xtalin/xtalout pin. In an AC analysis, this will give you an effective 15pf capacitive load. There will typically be 2-3pf of stray cap in the logic. Therefore, the total capacitive load that an oscillating element sees is about 18pf. The 18pf load cap is a common recommended load cap for many oscillators in the market. So, you should choose a crystal that requires an external 18pf load, but do not supply these caps because they are integrated on chip.