Announcements
IMPORTANT: Cypress Developer Community is transitioning on October 20th. To learn more and be prepared for this change, check out our latest announcement.
cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

How to Use the WICED Bluetooth Designer – KBA222042

chaitanyav_41
Employee

How to Use the WICED Bluetooth Designer – KBA222042

Version: **

Translation - Japanese:WICED Bluetooth Designerの使い方 - KBA222042 - Community Translated (JA)

Question:

Does Cypress have a tool to generate code like the PSoC® Creator™’s Component in WICED® platform? If yes, how do I use it?

A: Yes, the WICED Bluetooth Designer can generate code base on your configuration. The following example uses WICED Smart 2.2.3:

  1. Click the pull-down button below the File button to extend the toolbar, and then click WICED Bluetooth Designer.
    pastedImage_44.png
  2. Enter the project name in device name, (for example, 20737_test), and set the target chip (for example, 20737). Click Finish
    pastedImage_45.png
  3. Locate the project in Project Explorer, and open the “20737_test.wic”.  In Device Settings. select the BLE appearance, peripherals, and interfaces.  Select Support Over the Air Upgrades if OTA(DFU) is needed, and then click Generate Code
    pastedImage_47.png
  4. In Characteristics, select the Service such as “Blood pressure” that you want to add and click the plus icon to add it into the Profile.
    pastedImage_50.png
  5. Select the “Blood Pressure” service and add the Characteristic. After adding services and characteristics, click Generate Code.
    pastedImage_51.png
  6. Implement your code in your project.
0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Nov 14, 2017 10:05 PM
Updated by:
 
Contributors