Announcements
IMPORTANT: Cypress Developer Community is transitioning on October 20th. To learn more and be prepared for this change, check out our latest announcement.
cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

EOC interrupt of PSoC 4100S SAR ADC – KBA223608

chaitanyav_41
Employee

EOC interrupt of PSoC 4100S SAR ADC – KBA223608

Version: **

Translation - Japanese:

Question:

When I connect an interrupt Component to the end of conversion (eoc) output of the of PSoC® 4100S SAR ADC, errors occur as shown in Fig 1. How to solve the issue? Error messages are:

Error: plm.M0046: E2806: Failed to place fixed-function blocks. See the report file for details.

Error: plm.M0046: "C:\Program Files (x86)\Cypress\PSoC Creator\4.2\PSoC Creator\bin/sjplacer.exe" failed (0xFFFFFFFF)

pastedImage_2.png

Answer:

Some digital Components and routines in PSoC 4100S are different from those of PSoC 4100/4200. For example, eoc of the PSoC 4100S SAR ADC is unable to connect to an interrupt Component directly. If an interrupt at the end of conversion is required, use a Digital Pin Component, connect the eoc output to the digital pin, and use the pin’s interrupt. Refer to CE210558 to know about how to use GPIO interrupt. For more details, log in community.cypress.com, or contact Cypress Tech Support team.

pastedImage_9.png

Reference:

CE210558 - PSoC® 4 GPIO Interrupt

PSoC 4 Sequencing Successive Approximation ADC (ADC_SAR_Seq)

0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Apr 16, 2018 02:07 AM
Updated by:
 
Contributors