Announcements
IMPORTANT: Cypress Developer Community is transitioning on October 20th. To learn more and be prepared for this change, check out our latest announcement.
cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

Avaliability of read out programmable file using PSoC Programmer read function

Anonymous
Not applicable

Avaliability of read out programmable file using PSoC Programmer read function

Question: Can the read out data from read function of PSoC Programmer be saved as .hex file to program another PSoC devices?

 

Answer:

No, It is not possible to read out the hex file from existing hardware that was already programmed to be used to program another blank devices. However, the readout data using read function of PSoC Programmer gives us the raw format data stored in the PSoC flash. You can read this data provided that the flash security settings allow you to do so. The readout isn't a hex file in itself, but copy the readout data and can make a hex file using the Appendix B of AN2026A, which shows the format of the hex file generated by PSoC Designer. 

0 Likes
Version history
Revision #:
1 of 1
Last update:
‎Jun 13, 2011 12:16 AM
Updated by:
Anonymous
 
Contributors