1 Reply Latest reply on Apr 3, 2017 7:39 PM by BoonT_56

    For Broadcom BT Product, Crystal Tuning Guide

    phchoi_1695756

      Dear all,,,

       

      I have been developing our application (barcode reader) with CYW20706-A2 Version.

      I'm going to do tuning the external crystal (Main Clock / 24MHz) to measure good RF perfromance.

       

      For example, The attached file is the external crystal selection and tuning guide for Cypress BLE (PSoC, PRoC).

       

      For Broaccom BT Product, if there is any crystal tuning guide, pls, let me know hot to do tuning the external crystal (Main Clock / 24MHz).

       

      Thanks,

      Best Regards,

      Philip Choi

        • 1. Re: For Broadcom BT Product, Crystal Tuning Guide
          BoonT_56

          If you are using 20706 for your work, then you must have a reference schematic (including the 24MHz crystal as well as the tuning capacitors). My advice is that use those recommended values and parts from the BoM, especially the crystal which is a high-quality part (+/- 10ppm). These component values have been tuned and optimized for the normal operation of the chip. You should not need to do any fine tuning.

           

          As this forum supports only 20736/7, please refer to our Korean Cypress contact whom you are working with for more information.

          1 of 1 people found this helpful