1 Reply Latest reply on Jul 12, 2017 1:38 PM by ghouse Branched from an earlier discussion.

    Re: Is it possible to handle multiple SSIDs on BCM4343w? (con't)

    raul.benet@lightblueoptics.com

      skerr_1713761 ghouse

       

      Per this thread: Is it possible to handle multiple SSIDs on BCM4343w?

       

      is there any news on the potential new release you mention that would support AP+STA operation ?

       

      Does the current firmware for Murata 1DX (BMC4343W) support that AP+STA operation ? (ie: do we need both a new DHD driver and firmware, or it is just the DHD driver that needs 'updating' ?)

      [ we would be willing to test some release candidate software, if that were available]

       

      We are also trying to get brcmfmac driver (Freescale kernel 4.1.15) to work in AP+STA mode with the BCM4343W but so far no success.

      We are observing very strange behaviour, where the STA cannot complete the 4way-handshake once hostapd/brcmfmac enable the AP.

       

      Tanks,

      Raul.