0 Replies Latest reply on Dec 2, 2016 9:08 AM by user_114741021

    Production programming 3rd party tool?

    user_114741021

      During development (using Avnet BCM4343W IoT Starter Kit) OpenOCD was used to program the STM32F411 MCU and SPI serial flash.

       

      For the production boards however no FTDI chip is available only the MCU's JTAG pins that can be connected to a programmer/debugger tool.

       

      What recommendations do you have (ie. commercially available tools) for the flashing of production boards ?

       

      (The WICED-AN800-R-Factory-Programming App Note makes no hardware/tool recommendations for flash programming)