I will use the BCM4343W IOT starter kit based on BCM4343W and STM32F411 MCU. This kit is enable to talk with cloud service. By the way, my needs is to use a simple wifi connection with an external access Point. Do you have any simple example or application already developed that eable the IoT module to accept simple AT command or something like that?
You can download and install IDE (either 3.5.2 or new release 3.7.0).
You can find examples within the IDE after installation. Or you can take a look in Zip Folder.
Avnet's website is a good place to start. It has good Documentation and User Guides to get you started.
Avnet IOT Starter Kit Page