6 Replies Latest reply on Nov 28, 2016 12:08 PM by MichaelF_56

    EVB with hello_client can't pair with Win10 PC

    YufengP_26

      SDK Version:WICED-Smart-SDK-2.2.3

      Module: 20736, 20737

       

      Customer needs an application with Piconet feature to work as slave to pair Win10 PC. Customer found the SDK application hello_client on EVB can't work as slaver to pair Win10 PC. As I tested hello_client on EVB, it can work as Piconet mode, but it can’t be paired with Win10 PC. The steps are below. Do you have the suggestions to make hello_client worked as slave mode to pair win10 PC? Or do you have the suggested sample application to match customer application?

       

      1.download hello_client application to 20736 or 20737 EVB and reset the EVB

      2 go to the Bluetooth searching UI on Win10 PC once the tested EVB was found,  pair it

      3.then the dialog (password is invalid) will pop,

      4.The failure information can be found below, the whole log named win10-helloclient-connect-log.log is attached, would you please analyze the failed reason?

       

      get pairing request

      Bond Request

       

      l2cap Rx:

      40 20 0a 00 06 00 05 00 13 01 02 00 00 00

       

      blecm evt handler:

      0e 0c 01 18 20 00 74 8c 9d b7 28 86 53 16

       

      blecm evt handler:

      0e 0c 01 18 20 00 3e ae 57 20 6b 44 83 75

      @$*#04FF0EF700920101008004D61D01000000

      l2cap Rx:

      40 20 15 00 11 00 06 00 03 03 0d 04 91 14 08 8a

      13 e7 f2 67 0f f1 20 02 6e

       

      l2cap Tx:

      40 20 15 00 11 00 06 00 04 74 8c 9d b7 28 86 53

      16 3e ae 57 20 6b 44 83 75

      Get S_Conf.

       

      blecm evt handler:

      13 05 01 40 00 01 00

      @$*#04FF0EF7009201010080041A1D00000000

      l2cap Rx:

      40 20 06 00 02 00 06 00 05 07

      Pairing failed