1 Reply Latest reply on Sep 1, 2016 7:16 AM by MichaelF_56

    How to disable Adaptivity function in bcm43455 FW


      In bcm43455 FW, I would like to adjust threshold of Adaptivity active, transmission stop by this level.


      Current parameter is below



      This information is descrived in nvram_ap6255.txt, at /mnt/mtd.


      These value are only avalilable -75 to lower, -75dBm MAX.

      If I set threshold value is -65dBm by "eu_edthresh2g=-65", adaptivity active level is still -75dBm.


      Could somene instruct how to adjust threshold AND are there any other parameter to enable threshold?


      Thank you