12 Replies Latest reply on Nov 10, 2016 4:09 PM by axel.lin_1746341

    WPS doesn't work on SDK 3.7

    nguilbaud

      Hi,

       

      I'm using 4343W evaluation board with SDK3.7 and compiling "snip.wps_enrollee-BCM94343WWCD1-FreeRTOS-LwIP-SDIO download run". The WPS connection with the AP doesn't work and SW is frozen without any timeout. (2 min WPS timeout never happens).

       

      Console log:

      Starting WICED v3.7.0

      Platform BCM94343WWCD1 initialised

      Started FreeRTOS v8.2.1

      Initialising LwIP v1.4.0.rc1

      WWD SDIO interface initialised

      WLAN MAC Address : 02:0A:F7:47:66:C4

      WLAN Firmware    : wl0: Jun 19 2016 22:40:09 version 7.45.45.17 (r644353) FWID 01-dbaba83

      Starting WPS Enrollee in PBC mode. Press the WPS button on your AP now.

      Starting WPS Enrollee

       

      On SDK 3.5.2, everything is working fine with the same compile command and FW revision.

       

      Starting WICED v3.5.2

      Platform BCM94343WWCD1 initialised

      Started FreeRTOS v8.2.1

      Initialising LwIP v1.4.0.rc1

      WWD SDIO interface initialised

      WLAN MAC Address : 02:0A:F7:BF:CF:8E

      WLAN Firmware    : wl0: Jun 19 2016 22:40:09 version 7.45.45.17 (r644353) FWID 01-dbaba83

      Starting WPS Enrollee in PBC mode. Press the WPS button on your AP now.

      Starting WPS Enrollee

      Joining 'eSoftAP'

      Storing credentials for eSoftAP

      WPS completed successfully

      WPS enrollment was successful

      Joining : eSoftAP

      Successfully joined : eSoftAP

      Obtaining IP address via DHCP

      Network ready IP: 192.168.2.11

      Associated on channel: 1