- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I'm using SDK 3.7.0 with the Avenet BCM94343W module. Does anyone know how to set the BLE connection parameters such as the slave latency and connection interval?
Thanks,
-Rob
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
From the central side, the connection parameters will default to the values set in the wiced_bt_cfg.c file:
From the peripheral side, you'll need to send a connection parameter update request to the central and the central will handle it accordingly-- either accepting or denying the request. See the appropriate function in wiced_bt_l2c.h:
Jacob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
From the central side, the connection parameters will default to the values set in the wiced_bt_cfg.c file:
From the peripheral side, you'll need to send a connection parameter update request to the central and the central will handle it accordingly-- either accepting or denying the request. See the appropriate function in wiced_bt_l2c.h:
Jacob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Jake,
Do you know the time units of the intervals and timeout parameters? I'm assuming the latency is a multiple of the connection interval.
-Rob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes, the units are defined in the spec. This is taken as a snip from my blog on the Bluetooth Forum which uses a different API:
See my blog here for more details (implementation will vary from the Wifi SDK): Connection Parameter Update Requests
Jacob