2 Replies Latest reply on Jun 20, 2016 2:27 PM by seyhan

    What is "set_info_fe: remote cdc header return error code (-23)" under WICED-SDK-3.5.2 and W4343A1?

    tjpark

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>echo Transmit 802.11n : Start
      Transmit 802.11n : Start

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>set comport=4

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>set target=4343WA1

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>rem set target=43362A2

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>rem set target=4390A1

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>rem set target=43341B0

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>..\wl4343WA1 --serial 4 down

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>rem ..\wl4343WA1 --serial 4 country ALL

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>..\wl4343WA1 --serial 4 channel 1

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>..\wl4343WA1 --serial 4 mpc 0

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>..\wl4343WA1 --serial 4 up

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>..\wl4343WA1 --serial 4 nrate -r 54

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>..\wl4343WA1 --serial 4 pkteng_start 00:11:22:33:44:55 tx 40 1000 0
      set_info_fe: remote cdc header return error code (-23)
      ..\wl4343WA1: error -23

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>..\wl4343WA1 --serial 4 txpwr1 -1

      ..\WICED\WICED-SDK-3.5.2\WICED-SDK\libraries\test\wl_tool\scripts>rem ..\wl4343WA1 --serial 4 phy_forcecal 1

       

      How do I do here ?

        • 1. Re: What is "set_info_fe: remote cdc header return error code (-23)" under WICED-SDK-3.5.2 and W4343A1?
          seyhan

          Hi,

           

          Try following this order of wl commands:

           

          echo Transmit 802.11g : Start
          set comport=99
          set target=43362A2
          rem set target=4390A1
          rem set target=43341B0
          ..\wl%target% --serial %comport% down
          ..\wl%target% --serial %comport% country ALL
          ..\wl%target% --serial %comport% band b
          ..\wl%target% --serial %comport% chanspec -c 6 -b 2 -w 20 -s 0
          ..\wl%target% --serial %comport% mpc 0
          ..\wl%target% --serial %comport% ampdu 1
          ..\wl%target% --serial %comport% bi 65000
          ..\wl%target% --serial %comport% frameburst 1
          ..\wl%target% --serial %comport% rateset 11b
          ..\wl%target% --serial %comport% up
          ..\wl%target% --serial %comport% txant 0
          ..\wl%target% --serial %comport% antdiv 0
          ..\wl%target% --serial %comport% nrate -r 54
          ..\wl%target% --serial %comport% phy_watchdog 0
          ..\wl%target% --serial %comport% disassoc
          ..\wl%target% --serial %comport% phy_forcecal 1
          ..\wl%target% --serial %comport% phy_activecal
          ..\wl%target% --serial %comport% txpwr1 -1
          @echo sleep 3 seconds
          @ping -n 3 127.0.0.1 > nul
          ..\wl%target% --serial %comport% pkteng_start 00:90:4c:aa:bb:cc tx 40 1000 0
          

           

          Batch file is part of the SDK, .../libraries/test/wl_tool/scripts/tx_80211g_start.bat.

           

          Seyhan

          1 of 2 people found this helpful
          • 2. Re: What is "set_info_fe: remote cdc header return error code (-23)" under WICED-SDK-3.5.2 and W4343A1?
            tjpark

            Hi,

             

            I appreciated your interest but my issue is not solved yet.

             

            After following your proposal, the other error happens below.

             

            rwl_read_serial_port failed: reached max retry limit.

            remote_CDC_rx_hdr: Header Read failed

            query_info_fe: Reading CDC header failed

            Wifi adapter unsupported

             

            And I appropriately changed only "comport" and "target" in batch file. The rest of the batch file is kept.

             

            What's wrong ?