2 Replies Latest reply on May 31, 2016 2:05 PM by vikr

    i am getting error while loading code in to sn8205 through arm debuger as below,so what is reason for that?

    ineev_teksun

      Downloading Bootloader ...

      "**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"

      Downloading DCT ...

      "**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"

      Downloading Application ...

      "**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"

      Resetting target

      tools/makefiles/standard_platform_targets.mk:108: recipe for target 'run' failed

      make.exe[1]: *** [run] Error 1

      Makefile:220: recipe for target 'main_app' failed

      make: *** [main_app] Error 2

       

       

      13:42:38 Build Finished (took 33s.10ms)