6 Replies Latest reply on May 26, 2016 11:46 AM by jamesle1 Branched from an earlier discussion.

    WICED Sence Kit (problems programming)

    sagard_1819731

      Hello,

       

      thank you for help here: WICED Sence Kit

       

      whatever you provided it worked for me but i am facing some issue as mention below:-

       

      1.Connection:-

                                    I am able to program WICED Sense Kit with inbuilt__  "/WICED-Smart-SDK/Apps/wiced_sense" but connection getting lost after some short period of time what may be the problem.

       

      FYI: I am using USB power only and not pressed BOOT_ROM button.

       

      2.MAC Address:-

                                    After building inbuilt  "/WICED-Smart-SDK/Apps/wiced_sense" into WICED Sense Kit I am getting different MAC address than pre-built app how come?

       

      3.OTA support:-

                                  Did  OUT OF BOX WICED Sense Kit had OTA Support?

       

      Thanks & Regards,

      SAGAR PATIL

        • 1. Re: WICED Sence Kit (problems programming)
          rsiddhanth

          hello sagard_1819731

           

          1. for your first question you may have a peek to this link

          • 2. Re: WICED Sence Kit (problems programming)
            rsiddhanth

            hello sagarpatild

             

            MAC address depends on system. it will be different (random generated) MAC address for different computer system through which you download the firmware. it makes sense to get different MAC address when you load firmware from your computer

             

            can you please elaborate 3 more ??

             

            Regards

            Sid

            1 of 1 people found this helpful
            • 3. Re: WICED Sence Kit (problems programming)
              sagard_1819731

              Hi rsiddhanth,

               

              thank you for link.

              but i am facing same problem even when i am using battery

              here is LE SCAN log please go through it.

               

              LE Scan ...

              20:73:7A:1F:9C:25 WICED Sense Kit

              20:73:7A:1F:9C:25 (unknown)

               

              command:-$sudo gatttool -b 20:73:7A:1F:9C:25 -I

               

              [20:73:7A:1F:9C:25][LE]> connect

              Attempting to connect to 20:73:7A:1F:9C:25

              Connection successful

               

              [20:73:7A:1F:9C:25][LE]> primary

              attr handle: 0x0001, end grp handle: 0x0001 uuid: 00001801-0000-1000-8000-00805f

              9b34fb
              attr handle: 0x0014, end grp handle: 0x0018 uuid: 00001800-0000-1000-8000-00805f9b34fb
              attr handle: 0x0028, end grp handle: 0x002b uuid: 739298b6-87b6-4984-a5dc-bdc18b068985
              attr handle: 0x004d, end grp handle: 0x0053 uuid: 0000180a-0000-1000-8000-00805f9b34fb
              attr handle: 0x0061, end grp handle: 0x0063 uuid: 0000180f-0000-1000-8000-00805f9b34fb

               

              [20:73:7A:1F:9C:25][LE]>
              (gatttool:26212): GLib-WARNING **: Invalid file descriptor.

              thanks and regards,

              SAGAR PATIL

              • 4. Re: WICED Sence Kit (problems programming)
                sagard_1819731

                hi rsiddhanth,

                 

                2.MAC Address:-

                                              as first time i used WICED Sense Kit which was having inbuilt program was showing something like this:-

                LE Scan ...

                10:B2:75:34:91:A6  WICED Sense Kit

                10:B2:75:34:91:A6  (unknown)

                                              but after i programed it changed to:-

                LE Scan ...

                20:73:7A:1F:9C:25 WICED Sense Kit

                20:73:7A:1F:9C:25 (unknown)

                 

                3.OTA support:-

                                            Did  OUT OF BOX WICED Sense Kit had OTA Support?

                 

                I am trying to ask that when we get new WICED Sense Kit is it supports OVER THE AIR upgrade.

                because in WICED Sense Kit firmware there is a option of disabling OTA support.

                 

                Thanks and Regards,

                SAGAR PATIL.

                • 5. Re: WICED Sence Kit (problems programming)
                  sagard_1819731

                  hi rsiddhanth,

                   

                  Did WICED Sense Kit had built in support for OTA?

                   

                  thanks and regards,

                  SAGAR PATIL

                  • 6. Re: WICED Sence Kit (problems programming)
                    jamesle1

                    Hello.

                     

                    1.

                    I'm not sure why you lose connection.

                    Perhaps it's because of connection idle timer on WICED Sense kit.

                    Have you tried using its peer mobile app to connect instead of gatttool?

                     

                    2.

                    Do you get random BD address every time you program?

                    Or did the address change just once from inbuilt program after you programmed it?

                    If the latter is the case, then what

                     

                    3.

                    If I remember correctly, the WICED Sense kit has built in support for OTA.

                    I remember I was able to do it with the Android app. I'm sure iOS supports same feature.

                     

                    James