- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
How to configure WICED smart Tag as a CENTRAL DEVICE..
Please give some reference or Example codes for CENTRAL DEVICE.
also i unable to get ble_trace o/p in console
I enabled trace but it not listing com port options in trace_setup window (in UBUNTU).
i checked externally the com port which i used for programming ..its giving me some hex values.
on PUART (Other com port ) it is not giving any output.
waiting for reply..
Solved! Go to Solution.
- Labels:
-
HCI UART
-
Peripherhal UART
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello_Client within the SDK is the application you need to use as an example.
It works in conjunction with Hello_Sensor.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Generally speaking, Hello_Sensor and Hello_Client are the two main applications for Master/Slave (Central/Peripheral) development.
Take a look at the following thread: Testing Master and Slave Roles
Or this one, which also references the thread above: How to setting Central & Peripheral Roles together.
I think there is an issue with trace on OSX and Linux which requires that you need to install the IDE as sudo for the plug-in to work correctly.
I know the OSX instructions are here listed with the SDK download: WICED-Smart-SDK-2.2.2-IDE-Installer.zip
I believe this was an issue under Linux as well per SDK 2.2.2 for Linux
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you.
Both the reference suggested, doesn't help me to understand CENTRAL device configuration.Since it contains both configuration (MASTER and SLAVE).
I want to configure BCM920737TAG as CENTRAL DEVICE only not peripheral.
IS there any Central code example in SDK (without Peripheral)
Am using WICED SENSE tag as Peripheral and i want to use BCM920737TAG board as central.
Thanks,
Shrikrishna
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello_Client within the SDK is the application you need to use as an example.
It works in conjunction with Hello_Sensor.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello.
Just like mwf_mmfae said, you should look into hello_client.
In hello_client, you can either not call bleprofile_Discoverable at all or you can make the device not discoverable to make app not work as peripheral.
edit: you can also get rid off the GATT database.
James