2 Replies Latest reply on Apr 19, 2016 12:23 AM by VikramR_26

    What bluetooth classic profiles are supported in the WICED 3.5.2 SDK?

      We are using the AVNET IoT development board with the BCM4343W, are any of these protocols supported by the WICED 3.5.2 SDK?

       

      PAN/BNEP

      PPP/RFCOMM

      DUN

        • 1. Re: What bluetooth classic profiles are supported in the WICED 3.5.2 SDK?
          VikramR_26

          As per README.txt in the SDK we support these

           

          * Bluetooth Dual-mode stack support - classic BR/EDR and BLE modes
            - Also available BLE-only stack library with reduced memory footprint
          * Generic Attribute (GATT) profile
            - Sample BLE applications - Hello sensor and Proximity reporter
          * A2DP v1.2 (Advanced Audio Distribution Profile)
            - A2DP Sink Functionality
            - SBC Decoder
          * AVRCP (Audio/Video Remote Control Profile)
            - AVRCP Controller v1.3
            - AVRCP Target v1.5 (Absolute Volume)
          * Man-Machine-Interface via buttons
            - AVRCP play/pause/Skip-forward/Skip-backward
            - A2DP Volume Up/Down
          * SDAP (Service Discovery Application Profile)
          * GAP (Generic Access Profile)
          
          

           

          We will have RFCOMM support in future. Unfortunately we do not have the profiles you are looking for presently.

           

           

          Also to add AVNET IoT development board with the BCM4343W is BLE only,I doubt it support classic BT.

          KausikS_86

          1 of 1 people found this helpful
          • 2. Re: What bluetooth classic profiles are supported in the WICED 3.5.2 SDK?
            VikramR_26

            As per datasheet 4343W does support Classic BT, best example to verify is bt_dualmode_server under snip->bluetoooth

            In this RFCOMM is already supported as of SDK 3.5.2

            1 of 1 people found this helpful