The exact board number if bcm943341WCD1_3. I got this board directly from the local BCM sales representative. It's got a BCM logo on it. It was not from a third party.
This reference number is available on BCM data server for schematic and BOM.
We make the SDK, Chip on the eval board, and eval board itself.
Our Partners create the production modules that you would buy once in production, and typically provide a very detailed level of support during development as well. You can use this as another source.
Inventek Systems has the most experience with this device as they were early adapters and have worked through many of the issues.
Ah! I see. Thanks for the tip.
Let me try to contact the Partners. Do you happen to have any phone number or should I just google it?
Dick is listed here as the main POC: https://community.broadcom.com/community/partners/inventek-systems
He is extremely knowledgable, so I'd start with him.
I will also reach out to him as well under separate cover.
Thanks for your help with this. I will reach out to him.
With the "Inventek" module, our module antenna, and our customer FW, (AT CMD’s | IWIN ), we are achieving 18dBM and includes FCC compliance at 5G.
Would it be possible to learn more about your application requirements and any potential to consider Inventek?
2 Republic Road
Billerica, MA 01862
1 of 1 people found this helpful
Please advise if you have any further questions