2 Replies Latest reply on Mar 25, 2016 6:47 AM by userc_25697

    wiced_sense final firmware 1.3 problem

      Hello everybody

       

      I have wiced_sense tag when try to connect with my mobile phone it ask me form update to firmware1.3 and when I done the update from my mobile phone the wiced_sense work fine

       

      But when I want to update to wiced sense from my SDK 2.1

      Firstly when I build it make.file exe gives a eror . Then I changed the make file exe . I replace the make file exe in final1.3 firmware with the old firmware 1.1 then the build is done .

      Application is running its ok.

       

      But when I try to connect with my mobile phone again it ask me to update to 1.3 even I allready update it from my computer with SDK2.1

       

      I have special extra codes inside the wiced_sense and for  updating  from my mobile phone ; Its not a good idea for protecting my extra codes.

       

      What am I doing wrong ?

        • 1. Re: wiced_sense final firmware 1.3 problem

          I am taking this eror when I want to build the firmware1.3final 

           

           

          make.exe[1]: *** No rule to make target '../../build/wiced_sense-BCM920737TAG_Q32-rom-ram-Wiced-release/drivers/l3gd20_driver.o', needed by '../../build/wiced_sense-BCM920737TAG_Q32-rom-ram-Wiced-release/A_20737A1-wiced_sense-rom-ram-spar.elf'.  Stop.

          Makefile:329: recipe for target 'wiced_sense-BCM920737TAG_Q32' failed

          make: *** [wiced_sense-BCM920737TAG_Q32] Error 2

          • 2. Re: wiced_sense final firmware 1.3 problem

            No more need help

             

            I solve the problem istead of IDE 2.1.1

             

            I download the IDE 2.2.2 which also comes the wiced_sense app allready inside the ide

             

            I update the wiced sense from Smart IDE 2.2.2 now everything wroks fine