3 Replies Latest reply on Feb 9, 2016 10:49 AM by rashijain

    connect with iphone as wland hotspot

    salesforce.asg.demo@accenture.com

      Hello,

       

       

      when I try to run a demo on the board, I cannot connect to my wlan hot spot ( iphone).

       

      target : demo.aws_iot.shadow-BCM94343W_AVN download run

       

      Starting WICED v3.4.0-AWS

      Platform BCM94343W_AVN initialised

      Started ThreadX v5.6

      Initialising NetX_Duo v5.7_sp2

      Creating Packet pools

      WWD SDIO interface initialised

      WLAN MAC Address : B0:38:29:3D:3C:3D

      WLAN Firmware    : wl0: Nov 25 2015 12:57:14 version 7.45.45.1 (r602358) FWID 01-1920c040

      Please wait, connecting to network...

      (To return to SSID console screen, hold USER switch for 5 seconds during RESET to clear DCT configuration)

      *******************************************************

      Config SSID : WICED_AWS

      Password    : 12345678

      IP Address  : 192.168.0.1

      *******************************************************

       

      my config  wifi_config:

       

      #define CONFIG_AP_SSID       "WICED_AWS"

      #define CONFIG_AP_CHANNEL    1

      #define CONFIG_AP_SECURITY   WICED_SECURITY_WPA2_AES_PSK

      #define CONFIG_AP_PASSPHRASE "12345678"

       

       

      /* This is the soft AP available for normal operation (if used)*/

      #define SOFT_AP_SSID         "WICED Device"

      #define SOFT_AP_CHANNEL      1

      #define SOFT_AP_SECURITY     WICED_SECURITY_WPA2_AES_PSK

      #define SOFT_AP_PASSPHRASE   "WICED_PASSPHRASE"

       

       

      /* This is the default AP the device will connect to (as a client)*/

      /* This is the default AP the device will connect to (as a client)*/

      #define CLIENT_AP_SSID       "my iPhone"

      #define CLIENT_AP_PASSPHRASE "xxxxx"

      #define CLIENT_AP_BSS_TYPE   WICED_BSS_TYPE_INFRASTRUCTURE

      #define CLIENT_AP_SECURITY   WICED_SECURITY_WPA2_MIXED_PSK

      #define CLIENT_AP_CHANNEL    1

      #define CLIENT_AP_BAND       WICED_802_11_BAND_2_4GHZ

       

       

      /* This is the network interface the device will work with */

      #define WICED_NETWORK_INTERFACE   WICED_STA_INTERFACE

       

       

      But when I run a sample  without

           aws_config.c &      aws_common.c

       

      like in target : demo.aws_iot.pub_sub.publisher-BCM94343W_AVN download run

      I have access to my hotspot

       

       

      what i my problem ?