2 Replies Latest reply on Nov 20, 2020 4:47 AM by seki_4810216

    SD card is not mounting with my working board(Murata 1GC board based - CYW943907AEVAL1F)

    seki_4810216

      Hello,

      I'm trying the snip.sd_filesystem application. in Wiced Studio 6.4 with my working board and a 8GB SD Card.

      My working board was made based Murata 1GC board (CYW943907AVAL1F).

      I think, this has became correctly to detect a SD Card.

      But, the errors occur.

      Also, I have cypress board and I'm trying the snip.sd_filesystem application. this works normally.

      I attached log file.

      20201119_165740.png

       

      thanks and regards