3 Replies Latest reply on Jul 26, 2019 2:06 AM by RaktimR_11 Branched to a new discussion.

Can I use J-link Debugger to debug WICED?

YoLi_2201496 Jan 6, 2016 2:27 AM

Hi,

When I try to use J-Link Debugger(SEGGER - The Embedded Experts for RTOS and Middleware, Debug Probes and Production Programmers - J-Link Debugger ) to attatch the running board with the elf files provided under eclipse_debug.

It seems the symbol table is not corret, I can't get the corret call stack.http://cn.bing.com/dict/search?q=symbol&FORM=BDVSP6&mkt=zh-cn

Has any body ever try to debug BCM943362WCD4 using this tool?

1. Re: Can I use J-link Debugger to debug WICED?

RaktimR_11 Nov 22, 2018 8:49 PM (in response to YoLi_2201496)

Please follow this Downloading and debugging CYW43907 using Jlink Segger article to download through JLink. As the platform you mentioned already have a J-Link header, you can go ahead and plug yout Jlink device and follow the rest of the steps.
1 of 1 people found this helpful
Like Show 1 Likes(1)

Actions
2. Re: Can I use J-link Debugger to debug WICED?

MaR_3698711 Jul 25, 2019 9:49 PM (in response to RaktimR_11)

Hi
i'am using Murata Type1LD custom based board i followed the above steps but it did not work for me

please can you help me regarding this
Like Show 0 Likes(0)

Actions
3. Re: Can I use J-link Debugger to debug WICED?

RaktimR_11 Jul 26, 2019 2:06 AM (in response to MaR_3698711)

That article is only valid for CYW43907, not for ST host based platforms like 1LD. You can follow the steps mentioned in OpenOCD -WICED to download and debug 1LD based custom platform (Please check the comments section as well for modifications required in jlink.cfg).

While downloading, you might need to use Zadig to change the default driver of J-Link to libusbK and while debugging you need to switch back to J-Link driver.
1 of 1 people found this helpful
Like Show 1 Likes(1)

Actions