- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
We are using LBEE5HY1MW W-LAN+Bluetooth Combo Module with customized(STM32MP157A)device. We are making the connection between first device which acts as access point and second device which acts as station mode.Connection is happening between two devices and after 1 to 2 hours connection is improper for 2 to 5 minutes and again restoration connection is happening .In that case we are able to connect the Access point device with a PC also.Could you please help us to resolve the stability issue?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have also attached the configuration files below which we are using :
hostapd.conf(In device which act as Access point):
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
interface=wlan1
driver=nl80211
# WPA2-AES encryption
ssid=500
auth_algs=1
wpa=2
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
wpa_passphrase=#clq500#
# IEEE 802.11ac
hw_mode=b
channel=1
wpa_supplicant.conf(In device which act as Station 😞
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
update_config=1
network={
ssid="500"
key_mgmt=WPA-PSK
psk="#clq500#"
proto=WPA2
}