1 Reply Latest reply on Dec 18, 2015 12:49 AM by mbrandonhurd

    Device not showing up with "lsusb"

      I've been trying to get the BCM943362WCD4 working in ubuntu 14.04. I have done the procedure described in "Link". It still doesn't seem to be showing up, here is the current status of the device when using "cat /sys/kernel/debug/usb/devices"

       

      T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=04 Dev#= 19 Spd=480  MxCh= 0

      D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1

      P:  Vendor=0a5c ProdID=43fa Rev= 7.00

      S:  Manufacturer=Broadcom

      S:  Product=WICED Eval Board

      C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA

      I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

      E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

      E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

      I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

      E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

      E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

       

       

      I'm running out of ideas, any help would be greatly appreciated!

       

       

      Best,

       

      Brandon

        • 1. Re: Device not showing up with "lsusb"

          [SOLVED]

           

          PLEASE UPDATE THE INSTALLATION DOCS FOR LINUX

           

          See bellow for fix:

           

          sudo chmod 666 /sys/bus/usb-serial/drivers/ftdi_sio/new_id

          nano /sys/bus/usb-serial/drivers/ftdi_sio/new_id

          type my vendor and product id and save file with CTRL+x > yes

           

           

          Little surprised that no one chimed in...

          1 of 1 people found this helpful