3 Replies Latest reply on Nov 5, 2020 7:36 PM by DheerajP_41

    wicked mod programmer

    HaGo_4718696

      dear sir/madam,

       

                     when we are loading program to cybt-343026 module by using wicked mod programmer after loading 50 modules it is not working.

      can any one give the solution.

                   this is urgent for us please help me.

       

       

      thanks,

      harikrishna

        • 1. Re: wicked mod programmer
          AnjanaM_61

          Hello HaGo_4718696 ,

           

          Can you please clarify what exactly is the issue ?

          After programming 50 modules, the GUI is showing some error? If then what is the error ?

          Please give more details.

           

          Regards,

          Anjana

          • 2. Re: wicked mod programmer
            HaGo_4718696

            while loading firmware it is failing

            the log data:

            04-11-2020 12:15:48.937: LogManager: Started

            04-11-2020 12:15:49.589: WICEDModuleProg: Module Family: CYW20707_SFlash

            04-11-2020 12:15:49.627: WICEDModuleProg: Module Family: CYW20707_SFlash

            04-11-2020 12:15:49.647: WICEDModuleProg: Programming Board: UART Adapter Board

            04-11-2020 12:15:49.647: WICEDModuleProg: Initialization complete

            04-11-2020 12:15:49.692: ProgramManager: NewConfig1 - program created.

            04-11-2020 12:15:49.694: WICEDModuleProg: Default test program created.

            04-11-2020 12:15:49.794: PortSetDlg[40]COM3DUT: Connected to "COM3 - WICED HCI UART (COM3)" (115200, RequestToSend)

            04-11-2020 12:16:38.224: ProgramManager: Selecting_DUT 1/8

            04-11-2020 12:16:39.598: Prog[0]COM3 : Reset (COM3) Timeout!

            04-11-2020 12:16:39.602: Prog[0]COM3 : Soft-Reset Fail COM3

            04-11-2020 12:16:39.605: Prog[0]COM3 : Failed to reset on baudrate = 115200

            04-11-2020 12:16:39.610: Prog[0]COM3 : Failed to reset DUT

            04-11-2020 12:16:39.625: ProgramManager: ---->SetResult [1,1] = TestFailed

            04-11-2020 12:16:39.671: ProgramManager: Selecting_DUT 2/8

            04-11-2020 12:16:39.702: ProgramManager: Selecting_DUT 3/8

            04-11-2020 12:16:39.732: ProgramManager: Selecting_DUT 4/8

            04-11-2020 12:16:39.762: ProgramManager: Selecting_DUT 5/8

            04-11-2020 12:16:39.792: ProgramManager: Selecting_DUT 6/8

            04-11-2020 12:16:39.820: ProgramManager: Selecting_DUT 7/8

            04-11-2020 12:16:39.849: ProgramManager: Selecting_DUT 8/8

            04-11-2020 12:16:39.990: WICEDModuleProg: Test program stopped.

            • 3. Re: wicked mod programmer
              DheerajP_41

              Hi,

               

              Are you configured to automatically program the devices one by one? If yes, how many devices are you programming in a row?

              Is your programming consistently failing at 50th module everytime?

               

              Could you please use a different cybt-343026 module and and try programming.

              Please make sure that the you have selected the correct bad rate (115200) with flow control enabled in the configurationof DUT.

               

              Is it possible for you to try programming the failing device using chipload (Click here), so that we can narrow down the issue.

               

              WICED Module Programmer User Guide – KBA225060

               

              Thanks,

              -Dheeraj

              1 of 1 people found this helpful