I found the demo program for the WIFI for LED intensity. The new WICED IDE is a new learning curve for me. I am trying to learn how to import files and follow the video tutors. Thanks guys.
Are you referring Transmit MAC as MAC of Cypress WLAN or your MAC of the router?
Please let me know
Thank you for responding to my post. My problems are with the WICED IDE. I am trying to use the Pioneer Kit, PSOC6, Cortex-M0+/Cortex-M4 As a elaborate box for a Human Trafficking Org. There will be at least 150 rooms for clients. I need to call each room based on a WIFI address. And have a permanent address for my board. I will add voice and GPIO later. So I need a defined address for my board. Then I need to send an tempo address to on of the 150 rooms. I believe I will have to go through my router.
Correct, it has to go via the router (you have to configure CLIENT_AP SSID and password)
You can also check the connected devices in the router settings (connected MACs)