Is there some specific function in KitProg 2 that you need access to? Or could it be done with KP3?
I want to control the PSOC debugger functions automatically using python,
like I want access to set breakpoint function so I need its interface from
the debugger library, the same for delete breakpoint , get variable value
(link we see in the watch view ) and so on ..
How can I interface with the debugger ?
On Mon, 26 Oct 2020 at 12:54, AlanH_86 <email@example.com>
You never mentioned what PSoC kit your are using.
I believe Modustoolbox has the ability to use Python to access the GDB server. However, at this time, Modustoolbox can only work with PSoC6s and Cypress' WiFi products.
The link I provided earlier may have some clue as to using Python with the GDB server with regards to PSoC Creator.
PS: Here's another link I found regarding the debugger and Python: KitProg3 PSoC5 programming using python
Yes KP3 talks to Python... that is exactly why I was curious about KP2
Im not saying anything other than I know the KP3 talks to Python....
If I am correct, KP2s can be upgraded to KP3s via firmware.
However, can KP3s be used in PSoC Creator?
I think so.
But there is no risk as you can switch batch and forth with the fw-loader
In general you are in mostly uncharted territory... but it should work... I just dont think that anyone has tried whatever it is you want to do.