1 2 Previous Next 16 Replies Latest reply on Nov 16, 2020 10:41 PM by SudheeshK_26

    PSOC 4 CYBLE-212006-01 Current won't drop below 100uA

    pada_4804676

      Hello,

       

      We are attempting to drop the current of the CYBLE-212006-01 down to as low as possible. We are to the point where we just want to stop or hibernate the processor with nothing running just for concept.

      attached are the schematic and archived project. Lines 106 through 121 are where our current concern lies. We just want to drop the current as low as possible, but even with a stop command cannot drop below 117uA.

      We have reviewed the app note on low power applications, which has gotten us this far.

      We are using a micro-amp meter connected in series with the supply of 3.3v to measure the power usage.

       

      Any help would be appreciated.

      Thank you

        1 2 Previous Next