1 Reply Latest reply on Oct 21, 2020 4:19 AM by YuvaM_36

    Code flash ECC fault injection for cyt2b9-series

    chse_4803081

      Hello,Area need to understand: Setting flash address and parity bit

       

      I have tried to set Code flash ECC using fault injection concept. I referred Family architecture TRM and Register TRM.The information is not sufficient to set 2bit ECC of code flash.can you provide ECC fault injection user manual for cyt2b9-series  or please support me via call/mail?For me flash address bit fall above 24bit .if take device address  some address bits are lost to set in register.and want to understand how 8bit parity is inserted to trigger 2bit ECC.