8 Replies Latest reply on Oct 28, 2020 1:03 PM by AyZo_4728016

    PSOC6 UART using TXS0104 bidirectional voltage level translation


      Hi There,


      I am using PSOC6 to communicate with a controller board over UART. I am using TXS 0104 between the PSOC6 micro and the RS422 driver. The message length is about 300 bytes sent every 100 milliseconds. The issue is every few messages I get extra bytes (1 to 3 bytes) the extra bytes are 0xFF.


      Any Idea what what might be causing this behavior?