3 Replies Latest reply on Nov 18, 2020 2:32 AM by PeDo_4684411

    Downloading a program to a CYBT-343026-01 custom card.


      I am using a RS232 FTDI adapter to download a hello_sensor_app through the HCI interface. The communication goes fine and the minidriver is launched OK but  the log file shows  the module memory has a mistmatch in the bytes writen and read.


      I append here the last lines of the log:


      A total of 2 contiguous memory areas were filled:

      [FF000000..FF000027] DATA (40 bytes)

      [FF003000..FF01419B] DATA (70044 bytes)

      Download config error trying to verify 40 bytes at address 0xFF000000    (SOURCE:  CONFIG   Configuration data   build/hello_sensor-CYBT_343026_EVAL-rom-ram-Wiced-release/hello_sensor-CYBT_343026_EVAL-rom-ram-Wiced-release.hex) (Data mismatch at address 0xFF000000. Expected byte value 0x01 but device contains 0x66)


      Please, help.