1 Reply Latest reply on Oct 15, 2020 7:55 AM by MichaelF_56

    Does Infineon have plans to support existing radio modules hosted with ST or Microchip MCUs in feature upgrades for WICED orModusToolbox?

    GrCa_1363456

      For customers starting a new design with a module paired with an ST or Microchip MCU, what assurance do they have that they’ll be supported with necessary firmware features as support for WICED migrates over to ModusToolbox?

       

      Does Infineon have plans to support existing Cypress based radio modules hosted with ST and Microchip microcontrollers in ModusToolbox?

       

      If support in ModusToolbox for modules hosted by an attached microcontroller is up to the Module Partner, is there a process to support those module partners that I can reference when asking each of them of their plans to add ModusToolbox support for existing modules?

       

      Some of the modules hosted by ST and Microchip fall into this category include:

      Azurewave AW-CU307 based on CYW43362 with STM32411

      Azurewave AW-CU289 based on CYW43438 with STM32F412

      Inventek ISM43362-M3G-L44-E based on CYW43362 with STM32F205

      Inventek ISM4343-WBM-L151 based on CYW4343W with STM32F411

      Lantronix XPCW1002100B based on CYW43362 with STM32F205

      Lantronix PW205010001B based on CYW4339 with AT91SAM9G25

      Laird Sterling EWB based on CYW4343W with STM32F412

      Murata Type 1HD (LBWA1ZZ1HD-004) based on CYW43438 with STM32F412

      Murata Type 1LD (LBEE5PA1LD-005) based on CYW43438 with STM32F412

       

      ModusToolbox currently supports several of the above radios including:

      - CYW43012

      - CYW4343W

      - CYW43438

       

      It would also be helpful to know how Infineon plans to support two radios in the above modules not currently showing up in ModusToolbox:

      - CYW43362

      - CYW4339

       

      Greg

      For customers starting a new design with a module paired with an ST or Microchip MCU, what assurance do they have that they’ll be supported with necessary firmware features as support for WICED migrates over to ModusToolbox?

       

      Does Infineon have plans to support existing Cypress based radio modules hosted with ST microcontrollers in ModusToolbox?

       

      If support in ModusToolbox for modules hosted by an attached microcontroller is up to the Module Partner, is there a process to support those module partners that I can reference when asking each of them of their plans to add ModusToolbox support for existing modules?

       

      Some of the modules hosted by ST and Microchip fall into this category include:

      ·       Azurewave AW-CU307 based on CYW43362 with STM32411

      ·       Azurewave AW-CU289 based on CYW43438 with STM32F412

      ·       Inventek ISM43362-M3G-L44-E based on CYW43362 with STM32F205

      ·       Inventek ISM4343-WBM-L151 based on CYW4343W with STM32F411

      ·       Lantronix XPCW1002100B based on CYW43362 with STM32F205

      ·       Lantronix PW205010001B based on CYW4339 with AT91SAM9G25

      ·       Laird Sterling EWB based on CYW4343W with STM32F412

      ·       Murata Type 1HD (LBWA1ZZ1HD-004) based on CYW43438 with STM32F412

      ·       Murata Type 1LD (LBEE5PA1LD-005) based on CYW43438 with STM32F412

       

      ModusToolbox currently supports several of the above radios including:

      -          CYW43012

      -          CYW4343W

      -          CYW43438

       

      It would also be helpful to know how Infineon plans to support two radios in the above modules not currently showing up in ModusToolbox:

      -          CYW43362

      -          CYW4339

      For customers starting a new design with a module paired with an ST or Microchip MCU, what assurance do they have that they’ll be supported with necessary firmware features as support for WICED migrates over to ModusToolbox?
      Does Infineon have plans to support existing Cypress based radio modules hosted with ST microcontrollers in ModusToolbox?
      If support in ModusToolbox for modules hosted by an attached microcontroller is up to the Module Partner, is there a process to support those module partners that I can reference when asking each of them of their plans to add ModusToolbox support for existing modules?
      Some of the modules hosted by ST and Microchip fall into this category include: Azurewave AW-CU307 based on CYW43362 with STM32411 Azurewave AW-CU289 based on CYW43438 with STM32F412 Inventek ISM43362-M3G-L44-E based on CYW43362 with STM32F205 Inventek ISM4343-WBM-L151 based on CYW4343W with STM32F411 Lantronix XPCW1002100B based on CYW43362 with STM32F205 Lantronix PW205010001B based on CYW4339 with AT91SAM9G25 Laird Sterling EWB based on CYW4343W with STM32F412 Murata Type 1HD (LBWA1ZZ1HD-004) based on CYW43438 with STM32F412 Murata Type 1LD (LBEE5PA1LD-005) based on CYW43438 with STM32F412
      ModusToolbox currently supports several of the above radios including:- CYW43012- CYW4343W- CYW43438
      It would also be helpful to know how Infineon plans to support two radios in the above modules not currently showing up in ModusToolbox:- CYW43362- CYW4339

      dddyyy