1 of 1 people found this helpful
I think you are trying to discuss the same issue that you have mentioned in Device is not provisioning / configuring on on Android helper Application
Please don't get angry on me for not mentioning (actually forgot) one important change you have to do in WICED 6.4 to make CYBT-423028-EVAL module work. Please refer below blog post and follow the steps. This blog is applicable for WICED Studio SDK 6.2 or later to start using the CYBT-423028-EVAL platform WICED Studio: Platform Files for CYBT-423028-EVAL - KBA223637
I believe the issue is not related to mesh directly. It is the platform issue.
May I know if it worked for you. Please let me know if you have any doubt.
Yes you are correct, same issue is discussed in Device is not provisioning / configuring on on thread, as i am trying on MeshClient application also, so created separate thread. Sorry for creating multiple threads. Provisioning is working on Android phone, But issue with MeshClient still exist.
After opening the Network on MeshClient, can not detect un-provisioned device.
Could you please ensure you are following the complete and correct steps to provision the device using meshclient.
Please refer MeshClient and ClientControlMesh App User Guide
The meshclient will work only on Windows 10. The short sequence of steps are as below.
- Provide a name for the network and Create network
- Open the network.
- Scan for unprovisioned
- provision and configure
- Select the provisioned device from the control list.
- Do control operations.
Could you please share the Meshclient logs (trace.txt generated by meshclient) with us?