How to program psoc1 ic?

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
hama_4790386
Level 1
Level 1

I am designing pcb board that use CY7Y64215 28-pin ic (psoc1 family). I want to use mini USB type B to program and debug the ic.Is that possible or I have to use Miniprog3?

0 Likes
1 Solution
SampathS_11
Moderator
Moderator
Moderator
250 sign-ins 250 solutions authored 5 questions asked

You can kindly refer to PSoC® 1 ISSP Programming Specifications - CY8C21x45, CY8C22x45, CY8C24x94, CY8C28xxx, CY8C29x66, CY8... for using MiniProg3 to program PSoC1. "Host Programmer" in Figure 2.1 on page 7 is MiniProg3 or other ISSP programmer.

You may also want to review programming psoc1 with MiniProg3.

Best regards,

Sampath Selvaraj

View solution in original post

0 Likes
1 Reply
SampathS_11
Moderator
Moderator
Moderator
250 sign-ins 250 solutions authored 5 questions asked

You can kindly refer to PSoC® 1 ISSP Programming Specifications - CY8C21x45, CY8C22x45, CY8C24x94, CY8C28xxx, CY8C29x66, CY8... for using MiniProg3 to program PSoC1. "Host Programmer" in Figure 2.1 on page 7 is MiniProg3 or other ISSP programmer.

You may also want to review programming psoc1 with MiniProg3.

Best regards,

Sampath Selvaraj

0 Likes