2 Replies Latest reply on Sep 30, 2020 3:19 AM by MallikaK_41

    [CCG3PA] Bypass cable discovery when the usb-c cable is soldered to the board

    JaWI_4735906

      Hi,

       

      We are currently developing a USB-C charger embedding a CCG3PA chip working as a source. In the current state of the project, we intend to solder the USB-C cable directly to the the board of the charger. We also intend to use PDOs with current higher than 3A.

       

      As the cable connected to the CCG3PA won't change because it is soldered to the board, we are wondering : Is the cable discovery necessary in this case? Is there anyway to bypass it to be able to advertise PDO with current higher than 3A without having to identify the cable first? (We ensure that the cable soldered to the board is electrically able to withstand a 100W charge).

       

      Thanks in advance for your answer,

       

      Jacques