2 Replies Latest reply on Sep 23, 2020 2:26 AM by AbhilashP_31

    PDO'S    current limit

    zapa_4702046

      in configuration table each PDOs has current limit    in source code SDK i didn't find  any reference 

       

      Q1:  current limit  how it effect on cypress CYPD3175    does the stack reading  this parameters ? 

      Q2:  CSP  does has connection  to current limit   which update in configuration table

        • 1. Re: PDO'S    current limit
          AbhilashP_31

          Hi,

           

          "in source code SDK I didn't find  any reference"

          can I please know if you are referring to code examples or code function? The code function is attached below,

           

           

           

          Q1: "current limit  how it effects on cypress CYPD3175"

          Ans: The current is sensed using Rsense, which is then compared with the reference value(Vref) provided in the OCP section.

                 " does the stack reading this parameters"

                  Can you please reframe the question and highlight what you are referring to?

           

           

          Q2: "CSP  does has connection  to current limit   which update in configuration table"

          Ans: CSP : The pin CSP is used for Over Current Operation(OCP). In the configuration utility, the option Over current protection under Power Protection does this update.

           

          Regards

          Abhilash P

          • 2. Re: PDO'S    current limit
            AbhilashP_31

            There was some problem encountered while attaching the image.

            The image is attached in this section,